***Our Production time to build these boxes is running 8-12 weeks ***

We just finished up our first C7 Convertible Corner Sub Box! This will be for the Driver side only. We utilize the cubby compartment for air space and the Sub Box simply slides into place. All that needs to be done to install is to remove the cubby door.

We were able to make it a little larger than our C5/C6 boxes, going from .57 to .62 Cf air space. The JL10W3V3 hits hard and sounds incredible. We used the existing sub out put wire and used a PAC harness to convert a RCA output for the amp. This allows you to use all your factory audio and makes for a plug and play install. We installed the bass knob on the knee bolster right below the hatch release. The carpet is not an exact match and we are actively looking for a flex form carpet that will match. The black carpet we used is really close and the lighting from the picture makes the color match worse than it is. The customer of this C7 was very pleased with the carpet match and the sound!

***We recommend a 4ohm Subwoofer***

 We are also releasing a C7 Partition, VetteBin and Premium Insulation Kit.

If you currently have a subwoofer, here are the dimensions that fit our Sub Box.

Nominal Diameter10.0 in / 250 mm

Overall Diameter (A)10.5 in / 267 mm

Mounting Hole Diameter (B)9.0625 in / 230 mm

Bolt Hole Circle (C)9.7 in / 246.5 mm

Magnet Diameter (D)5.25 in / 133 mm

Mounting Depth (E)5.93 in / 151 mm

Driver Displacement0.049 cu ft / 1.39 L

Net Weight12.25 lb / 5.56 kg