Fits: All 2011-2018 Jeep Grand Cherokee models.

What you get: (2) Rear Bumper light blackout covers.

Material: 1/16'' thick Acrylic. (This is not a vinyl or cheap sticker overlays; it's the real deal hard Acrylic blackout kit!!)

Installation: Each cover is securely attached using heavy duty CLEAR 3m® double sided tape. This means you won't see any tape outline and you can remove them later if you sell your truck, you can resell these as well! -Clean each factory reflector with supplied alcohol, then just remove the red tape backing and stick on. It can't get any easier then this!! It will take you less then 5 minutes to install this kit! 

Please note** If your SUV was ever waxed or ceramic coated most likely so were the reflectors. You MUST remove any wax or ceramic coating before you install these covers or the 3m tape used will not stick. Alcohol alone will not do this, please consult your detailer to find the best way to remove. You should test the light before install by putting any tape on the light and if there is good adhesion you should be ok. If the tape you used for the test does not stick or comes off very easy so will our covers.