Loading... Please wait...

Our Newsletter

C5 Corvette Pre Cut Insulation Kit

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
Calculated at checkout

Product Description



 Insulation Kit

There have been 1000's of these kits sold and we build these in house, this kit has been sold on the Corvetteforum.com for years 
and there is a lot of customer feedback about these kits on the forum.



The C5 Pre-cut Insulation kit comes with everything you need to insulate and provide sound deadening in your Corvette,
including Pre-cut pieces for your doors.


Other kits on the market provide a similar product, but do not provide pre-cut pieces for your doors and storage bins, which allow road noise to be present in your front and rear cabin. Our kit gives you everything you need to COMPLETELY insulate your C5 Corvette.


Our kit is a non-fiberglass, non-asphalt based product which weighs in at 3.5 lbs, for those who are weight conscious, it rejects 97% of the radiant heat, and has a manufacturer's rating of 19db of sound and road noise reduction!!! (please see the notes below on this... ) 
It is only 3/16" thick, so as not to interfere with proper mounting of your panels and seats, and all holes are pre-cut & all pieces are clearly labeled for your convenience. 
It is our #1 goal to provide you ease of install, while making a HUGE improvement in your overall enjoyment of your Corvette!!! 
Each kit is hand cut to our specifications, and guaranteed to make a dramatic difference in your C5!!! 

Each kit comes with the following pieces:
  • Driver & Passenger front floorboard pieces, with holes cut for seat bolts and pedals.
  • Driver & Passenger side tunnel pieces, cut around your e-brake.
  • Full center console pieces, with holes for the center console bolts.
  • Driver & Passenger side Door Panel pieces.
  • Full Cargo area floor pieces.
  • Full Side rear wheel well pieces.
  • Full back wall and corner pieces.
  • Full Center Well pre-cut pieces.
  • Extra pieces for odds and ends coverage that you may need.


Say goodbye to over-heated center consoles, and noisy front cabins!! Our C5 kit is the perfect addition to your C5, and is recommended for every Corvette owner as the #1 modification for their Corvette!!! 
Your Corvette will be cooler in the summer, a lot less noisy, and you will regain use of your center console once again. 

A lot of research and development has gone into this kit, and we are proud to say that our kit is made to our demanding specs, in house, and cut off of our own templates.

Some have emailed and asked, so here is a picture of the material, as well as some specs on the material itself: 

It has 5 layers, and though it is rated at a 19db drop in noise, my customers have tested it in the Vettes at 6-9 db. reduction. Here are some manufacturer specs on it: 


Characteristics | Value | Regulation 
Cell Structure: Closed 
Nominal Thickness: 5 mm (+ or - 0.5mm) 
Steam Permeability: 0.033 gr/m2hkPa ASTM E-96 
Noise Insulation: 19dBA IRAM 4063 at 50hz.
Flame Spread Index/Class: 25 or less/ "A" - Class 1 0 ASTM E-84 
Smoke Index/Class: 450 or less/ "A" - Class 1 15 ASTM E-84

Aluminum Foil 
polyethylene backing 
closed-cell Polyethylene foam 
polyethylene backing 
Aluminum Foil

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the C5 Corvette Pre Cut Insulation Kit to your wish list.

You Recently Viewed...